Empire Controls
MWA Technology Limited, (Incorporating Empire Controls),
Offices & Workshop, 2 Wharton Street Ind. Est.,
Birmingham, West Midlands, B7 5TR

+44 (0) 121 327 7771


Dry riser


Dry riser

An inlet breeching at ground level provides the connection to the water supply of the dry riser system. The dry riser system is normally dry and is charged by the fire brigade in an emergency. Breeching inlets to the dry riser have either 2 or 4 inlet connections complete with 2½” male instantaneous inlets to BS336 fitted with non-return valves and with a 1″ drain valve.

  • 100mm (4″) dry rising main uses a 2- way inlet breeching in a vertical or horizontal position.
  • 150mm (6″) dry rising main uses a 4-Way inlet breeching.
  • Dry riser equipment complies with the requirements of BS 5041 Part 3.
  • The Breechings are normally housed in dry riser inlet cabinets, normally recessed into the external wall of the building and the outlet valves are housed in dry riser outlet cabinets on every floor of the building.
  • Dry riser landing valves are available with bsp or PN16 connections

Please contact our technical support team for Wet Riser systems.

Dry riser cabinet specifications

  • Cabinet & Door: 16swg Zintec Steel
  • Colour: As Standard Red Ral 3002
  • Architrave: 30mm Wide All Round
  • Glass: 6mm Georgian Wired, PRV Lettering
  • Lock: Yale Slam Lock Keyed Alike
  • Hinge: Stainless Steel Piano Hinge
  • Conforms: To BS 5041 Part 5
Empire Controls Associations