Home

Home > Enquiry > Contact us

Tel: +44 (0)121 327 7771
Fax: +44 (0)121 327 1117
Email: sales@empirecontrols.co.uk

 banner1
banner2
nav bar
nav bar valve button metering button nav bar oil fill & level button gas detection button gas proving button fire fighting button nav bar
nav bar nav bar

PRODUCTS

> valves

> metering

> oil fill and level

> gas detection

> 1 channel
> 3 channel
> 5 channel

> gas proving

> fire fighting
subheading
subheading Stand alone gas detectors subheading
subheading
side rule

Stand alone gas detectors

The EC61 is a stand alone gas detector with a high sensitivity sensor for the detection of gas concentration. The stand alone gas detector is available in two models. EC61 for use on natural gas detection and the EC62 used for LPG and cylinder liquid gas.

  • Pre-alarm LED signal when below the L.E.L
  • Internal audible alarm
  • Automatic gas solenoid valve shut off
  • Continual sensor diagnostic tests
  • Fault indication
  • Mute override for 10 minutes
  • Insulated shock resistant enclosure
  • Complies with UNI CEI 70028 standards
  • IMQ homologation
  • 230v 50Hz

When gas is present well below the L.E.L(lower explosion limit) the gas detector will enter the pre- alarm state with LED indication. The audible alarm and gas solenoid valve shut down will be delayed to avoid false alarm situations. Once the predetermined gas concentration level has been reached the gas detector will go into full alarm. This will have both audible and visual alarms, within the gas detection unit, also activating the gas solenoid valve to close.



If you cannot find what you are looking for then please contact us.
advert side rule
bottom rule

Created and designed by Anomad design
© MWA Technology 2008. All rights reserved.

Home • valves • metering • oil fill & level • gas detection • gas proving • fire fighting • sitemap • links