Home

Home > Enquiry > Contact us

Tel: +44 (0)1452 314 132
Fax: +44 (0)1452 314 132
Email: sales@empirecontrols.co.uk

 banner1
banner2
nav bar
nav bar valve button metering button nav bar oil fill & level button gas detection button gas proving button fire fighting button nav bar
nav bar nav bar

PRODUCTS

> valves

> gas solenoid valves
> free fall fire valves
> solenoid valves
> 2 port & 3 port    motorised valves

> metering

> oil fill and level

> gas detection

> gas proving

> fire fighting
subheading
subheading Solenoid valves subheading
subheading
side rule closed direct acting

Normally closed direct acting solenoid valvess

Empire Controls range of direct acting solenoid valves are suitable for water, air and oil at temperatures of -10 deg C to +160 deg C. The direct acting solenoid valve is ideal for smaller pipe sizes where there is no pressure differential across the solenoid valve. This means that the solenoid valve will operate if there is equal pressure on the up stream and down stream of the solenoid valve.
  • 1/4" 0-16 bar pressure rated solenoid valve
  • 3/8" 0-16 bar pressure rated solenoid valve
  • 1/2" 0-16 bar pressure rated solenoid valve
  • 3/4" 0-2.5 bar pressure rated solenoid valve
  • 1"    0-2.5 bar pressure rated solenoid valve

Power supply available for solenoid valves
24vAc 50/60Hz, 110vAc 50/60Hz, 230vAc 50/60Hz, 12vDc and 24vDc solenoid coils
advert side rule
closed servo assist

Normally closed servo assisted solenoid valves

Empire Controls range of direct acting solenoid valves are suitable for water, air and oil at temperatures of -10 deg C to +90deg C. The servo assisted solenoid valve has a far higher pressure rating as it uses the differential pressure across the solenoid valve to help it to open with the solenoid operator. There must be a difference of 0.1 bar from the up stream and down stream pressures across the solenoid valve.

  • 3/8" 0.1-20 bar pressure rated solenoid valve
  • 1/2" 0.1-20 bar pressure rated solenoid valve
  • 3/4" 0.1-20 bar pressure rated solenoid valve
  • 1"    0.1-20 bar pressure rated solenoid valve
  • 1 1/4" 0.1-10 bar pressure rated solenoid valve
  • 1 1/2" 0.1-10 bar pressure rated solenoid valve
  • 2"    0.1-10 bar pressure rated solenoid valve

Power supply available for solenoid valves
24vAc 50/60Hz, 110vAc 50/60Hz, 230vAc 50/60Hz, 12vDc and 24vDc solenoid coils
open servo assist

Normally open servo assisted solenoid valves

Empire Controls range of direct acting solenoid valves are suitable for water, air and oil at temperatures of -10 deg C to +90deg C. The servo assisted solenoid valve has a far higher pressure rating as it uses the differential pressure across the solenoid valve to help it to close with the solenoid operator. There must be a difference of 0.1 bar from the up stream and down stream pressures across the solenoid valve.
  • 3/8" 0.1-20 bar pressure rated solenoid valve
  • 1/2" 0.1-20 bar pressure rated solenoid valve
  • 3/4" 0.1-20 bar pressure rated solenoid valve
  • 1"    0.1-20 bar pressure rated solenoid valve
  • 1 1/4" 0.1-10 bar pressure rated solenoid valve
  • 1 1/2" 0.1-10 bar pressure rated solenoid valve
  • 2"    0.1-10 bar pressure rated solenoid valve

Power supply available for solenoid valves
 24vAc 50/60Hz and 230vAc solenoid coils


Empire Controls can supply solenoid valves for any media type including chemicals and gases. Sizes are available up to 4" flanged, hazardous and explosion proof solenoid valves are also available. Please contact our technical support team who will gladly assist you.
bottom rule

Created and designed by Anomad design
© Empire Controls 2007. All rights reserved.

Home • valves • metering • oil fill & level • gas detection • gas proving • fire fighting • sitemap • links