Gas proving systems

The Intelligas EGIP-1E gas proving system is easy to install, with a straightforward LED display. It’s different to other proving systems because all of the connections are mains rated – making wiring easier and data cabling unnecessary. This means installation is about 30% quicker than alternative systems, saving on labour. All this, plus it’s backed with our 3-year guarantee. It’s a safe choice.

Key Features

• Complete Corgi technical bulletin 130 compliant, key switch start and BS6173 compliant
• Adjustable purge and prove time (purge 5s / 10s and prove 30s / 60s)
• Automatic detection of downstream leaks and open gas valves to prevent dangerous gas leak situations
• System automatically purges and proves the gas line for integrity, and gas is only made available when full prove is carried out
• Simple to install single valve and pressure switch arrangement (pressure switch screws directly into gas valve piezo port)
• No complicated LCD display driver chips to go wrong in the heat of a kitchen (unlike some competitor products)
• System provides control of electrical systems such as bench sockets via an emergency stop interfaced keyswitch on the panel fascia
• System only uses a main gas solenoid valve (not included) so no need for an unsightly proving valve and bulky arrangement
• Compliance with CORGI’s TB130 and BS6173 – the system needs the manger’s keyswitch to start and low gas pressure monitoring, even after start-up
• Low voltage: sensor outputs and interlocks are all 24v, electrically isolated supply, safer wiring and safer for service personnel

The gas proving & fan interlock system ensures that the ventilation is on and there is no gas escaping to atmosphere before the gas solenoid valve is opened.

Very easy to use with an LCD display on the gas proving panel giving the operator solutions and not just LED indications. The LCD panel tells the operator the status and what to do in the event of any failures or problems. This gas proving system utilises a true differential pressure across the gas solenoid valve and fan failure bypass to meet GaSafe & HSE guidance.

Gas will not be available in the kitchen unless any mechanical ventilation is switched on, this is achieved by a 2 channel current monitor connected to the gas proving panel which is more reliable than air differential pressure switches. The unit has electronic pressure measuring technology, measuring true differential pressure on both sides of the gas solenoid valve. The gas proving system will ensure the gas supply cannot be turned on if there is a gas leak.

The Intelligas 100P gas proving system meets the requirements of IGE/UP/11 and it’s easy to install. It’s carefully designed and clearly labelled, and if you’re having problems our 24-hour helpline is moments away.

Key Features

• Simple, effective entry level gas proving system
• Supplied complete with remote emergency stop button and gas pressure switch
• Full system status indication
• Easy wipe clean fascia
• On board emergency stop button (that doubles as a system on / off switch)
• All connections on front panel, leaving the complete enclosure for cable entry
• Clearly-marked terminals for easy installation
• Fire alarm interlock
• 1 additional emergency stop button can be connected directly to the PCB
• 2 year guarantee

The Intelligas EGIP gas proving system is easy to install, with a straightforward LED display. It’s different to other proving systems because all of the connections are mains rated – making wiring easier and data cabling unnecessary. This means installation is about 30% quicker than alternative systems, saving on labour. All this, plus it’s backed with our 3-year guarantee. It’s a safe choice.

Key Features

• Kit includes control panel, 2 air pressure switches, emergency stop button, gas pressure switch and installation instructions
• Complete Gasafe technical bulletin 130 compliant, key switch start and BS6173 compliant
• Adjustable purge and prove time (purge 5s / 10s and prove 30s / 60s)
• Automatic detection of downstream leaks and open gas valves to prevent dangerous gas leak situations
• System automatically purges and proves the gas line for integrity, and gas is only made available when full prove is carried out
• No complicated LCD display driver chips to go wrong in the heat of a kitchen (unlike some competitor products)
• Compliance with CORGI’s TB130 and BS6173 – the system needs the manger’s keyswitch to start and low gas pressure monitoring, even after start-up
• Low voltage: sensor outputs and interlocks are all 24v, electrically isolated supply, safer wiring and safer for service personnel

• Emergency panic button
• Current monitor for air extraction fan

If you cannot find what you are looking for then please contact us.